Error message

  • Deprecated function: Methods with the same name as their class will not be constructors in a future version of PHP; views_display has a deprecated constructor in require_once() (line 3161 of /homepages/20/d194021378/htdocs/app793862104/includes/
  • Deprecated function: Methods with the same name as their class will not be constructors in a future version of PHP; views_many_to_one_helper has a deprecated constructor in require_once() (line 113 of /homepages/20/d194021378/htdocs/app793862104/sites/all/modules/ctools/ctools.module).

Further Information and Articles



A few ideas to help us build better models.



Brushing with enamels: are you always disposing of dirty turps, only to refill the jar with more clean (and expensive) turps every week or two?  

Make turps last longer by using two jars, one has "dirty" turps in and is used to rinse the main material from the brush after wiping with a dirty cloth (the sediments, especially with matt paints, will drop to the bottom).  The other jar has "clean" (or as clean as possible) turps in it.  This is used to clean the paint brush before drying with a clean cotton cloth.  

When eventually the turps is changed the clean turps becomes the "dirty" jar, and only new turps is used in a fresh jar, becoming the "clean" jar.  

The paint brushes stay cleaner and the turps lasts much longer, for several months, depending on usage of course.


If you use se Slaters Plastiglaze or similar for glazing coach windows etc.  and using liquid poly for sticking the glazing can cause seeping onto the glazing material making it opaque or messy around the edges of the windows no matter how well applied.

Try using use dots of Impact Adhesive applied with a cocktail stick to the inside of the window frames.  It is a solvent, so actually sticks.  The glazing can also be re-positioned slightly for a few minutes until the glue dries if required.  It will also be noticed that the adhesive "strings" slightly, and this can be used to advantage up the window frames and along cant rails etc. giving more glueing surface (not diagonally across the window openings though!)



When attempting to restore old rolling stock I tried Dettol Liquid to strip the enamel paint from some coaches after reading about it in a magazine.  It does work.  I stripped two coats of paint from these four-wheeled coaches without harming the plastic.  Using a 50/50 solution of Dettol and water in a little tub or old cup, drop in you vehicle for 6 to 8 hours or overnight.  The result is a bubbled paint surface just like paint stripper.  Scrub this off with an old toothbrush and you will find that most of the paint has gone except perhaps stubborn corners which can be picked out with a pin.....and as a bonus, all the germs are gone too!  

If you feel you need to give it a second dip that does no harm at all. 








Passengers can't usually be seen very well inside closed coaches, so try buying cheap seated chinese H0 scale figures off the internet and use them.  They are usually in some garish colours though, so give them a wash of thinned dark grey before gluing them to the coach seats. 


Model Railway Exhibition/Open Day 2nd March 2019

Our 5th Model Railway Exhibition

will be held Saturday 2nd March 2019

Blyburgate Hall, Blyburgate, Beccles, NR34 9TF


Scheduled to appear - the following narrow gauge layouts:

009 and H0e layouts:








0-16.5 layouts:




Gn15 and larger scales:




Plus our annual Group Challenge competition models.

Modelling Demonstration.

Sales stands:

009 Society Sales, Great Eastern Models, Narrow Planet, Bure Valley Railway,

Norfolk Heath Works, James Corsi Sales

Southwold Railway Trust, Halesworth to Southwold NG Railway Society,


Admission: Adults £3,  Accompanied under 16's free

Approx 10 minutes walk from Beccles Railway Station

Please note: Some exhibits will be displayed in the upper room reached by a short flight of steps.





October 2016 Meeting

We met on October 3rd, and there was a record attendance for one of our monthly meetings of 15 people.  It was a great little meeting with lots to see and we never got round to our formal chat.



Alex brought this superb Hudswell Clark locomotive from Narrow Planet running on a Minitrains F&C chassis.  It is seen running on a new 4ft baseboard which he is going to create a new layout upon.








Two Fourdees Glyn Valley Tramway locomotives see on a second hand layout that Richard obtained.  Locos displayed by Phillip and Stuart 2.








The layout, originally built by Lee Bryant and named "Thurtey" to celebrate the Wessex Narrow Gauge Modellers 30th anniversary is 30" x 30" and the track plan is in the shape of a "30" and he built the layout for £30!

This is the "3" shaped scenic frontage with track running onto piers on a seafront scene.




Richard also bought a long another loco, a Dapol Drewry kit bash seen pullig a bogie hopper wagon of unknown origin, and two Shapeways open cattle wagons of which one of them can be seen behind Deutz diesel number 21.












Graham brought along his trial Gn15 scale layout "Longstone Maintenance Shed", and seen are two Smallbrook Studios locomotives, a Harlequin and a Columbine. These are running on standard Hornby class 0F "00" gauge chassis.







Stewart brought along a new layout uder construction in 1:450 scale T gauge. Trains and track are Japanese KK-eishindo models.  The layout will feature a promontory, hills and rocky cliffs.








Bill is spending many hours constructing on of his usual very detailed deisel locos in card.  This is running on a Lima chassis.









Barry displayed at least ten Gn15 locos, many to the exact G scale (1:22.5).  Here are three of them:

No.10 a scratch built deisel on a Bachmann Gasmech chassis, Steam loco No.5 scratch built on a Fleischmann Magic Train chassis, and a Sidelines "Gnat" running on a Black Beetle chassis.





















Along with the Glyn Valley loco Stuart 2 was displaying his train of GVT Peco four-wheelers.










Roger displayed his first 009 loco kit, a Peco "Jeanette" running on a Minitrix chassis, and below, one of his later models, a Dolgoch running on a 0-4-0 Arnold chassis.













Stuart built this Gn15 scale open 12-seat Heywood style coach in card as a prototype for more coaches in different configurations to follow.









August 2016 Meeting

There were ten members and one visitor from Herfordshire at our August meeting.

Unfortunately we were unable to take any photographs this time, and as people have been doing "summer" things, not many models were on show.

Chris brought along an N gauge Tomytec BM-17 chassis which is going to be used for a new 009 scale double-ended railbus. He also took some photos and an on-board video of "Shipmeadow" 009 layout which Richard was running.  Hopefully he can edit it into something watchable.

Alex was giving a selection of his 009 locos and stock a run on "Shipmeadow", and Alan had received the latest issue of "Narrow Gauge & Shortline Gazette" for people to browse.

That's about it for August, hopefully we will have more photos of our next meeting, our Running Day Exhibition on Saturday 3rd September.


July 2016 Meeting

Eight of us gathered for the July meeting at Barsham Village Hall.  Richard brought along his 009 layout "Shipmeadow" where extra details have been added including a Southwold Railway style buffer stop, and there were some recently completed models having a run.  Also, Jim was displaying his 009 layout "Hubbards Halt" which now has a lighting rig.



Jim's 009 scale GVT tram loco on a Bachmann Plymouth chassis running on "Shipmeadow".









Peter brought two loco's to display, which are also seen running on "Shipmeadow".  This is "Moelwyn", a Meridian Models Baldwin Gas Mechanical loco that has been modified with a front pony truck.








The second, is a Saltford Models DeWinton vertical boilered loco.










James has converted a 7mm O-16.5 KAZ firetruck into a rail-mounted vehicle using a Bachmann HO MOW vehicles motorised chassis.








Two superb models from Bill.  These are 1/16th scale, representing 10 1/4" gauge items. 

A nurseryman's flat wagon with wheelbarrow load.  The wagon body is scratch built on a OO scale Triang long wheelbase chassis. 

And below, a grinding wheel, again scratch built





Stuart brought along two 7 1/4" gauge wagons and some sectional track.

The eurocrate flat wagon now has a crate load.  Stuart has bult a new flat wagon out of timber, it has three-point suspension, wooden axle blocks turned steel wheels and dog spike couplings.

The track has cast aluminium sleepers with steel bar rail. the rail lengths have welded pins on the ends that locate in the sleepers.


Meanwhile, 27 miles away, Chris and Graham had to return home as their car developed a fault.  While we were waiting for the motor engineer to turn up Chris showed me his new Tomytec Bo-Bo N gauge chassis which will be used as the motive power for a 009 scale railmotor body and presented me with a short video on CD of his 009 layout "Ashfield Green" which will appear on the website soon.  I was able to show him some of my Gn15 scale models, some of which are in the photo below:


Loco number 2 "Jiro", a Smallbrook Columbine kit, the finished bogie coach and various wagons under construction photgraphed on what will become a small trial layout depicting the railway workshops.  A decision now has to be taken about which couplings to permanently use.



June 2016 Meeting

Eight of us gathered for the June meeting in Barsham.  A few models were displayed (photos below), and we discussed future events including a proposal to hold a Running Day Mini Exhibition in September on behalf of the village hall.  Chris presented his first video of "Ashfield Green" (009) taking a trip by train on an on board mini USB camera, quite good quality too.  Graham brought along a new feedback controller to test, made by Trax Controls of Norwich.

(Click on photo for large image)


 A strange permanent way 009 scale loco and coach from Phil Porter.  It was built many years ago and runs on what appears to be a home made brass chassis.








Meanwhile Graham has had "a bit of a turn",  He is now changing interests to a Gn15 project, this is his first loco and wagon, both by Smallbrook Studio in the Heywood style. No.1 loco, to be named "Proteus" has yet to receive it's name plates.







Richard recently bought this ready made 009 model from the 009 Society sales stand, a Meridian Models kit.  It has now been repainted in the Beccles & Bungay Railway livery.
Phil also brought along this Tebee Models De Winton style vertical boilered loco in 009 scale.  We are trying to identify the wagons which the loco is hauling.

May 2016 Meeting

Ten of us gathered in Barsham on 4th May.  Several new locos and rolling stock items were displayed and during our discussion we counted the votes for next years "Challenge".  It was initially a three-way tie, but as one member had not yet selected we gave the deciding vote to him.  The result was to build a model of a narrow gauge railway-served building with the interior detail visible.  Exact rules will be published soon.

Here are a few photos taken at the meeting:


An 009 scale Glyn Valley Tramway Beyer Peacock tram loco modelled by Jim on a Bachmann Dock Shunter chassis.










A 1/16th scale scratch built Donkey Wagon fully detailed with internal engine running on 16.5mm track by Bill.










Very original brake wagons and twin tank wagon in 009 by Chris.  Inspired by S&DJR 10 ton special brake van 197 and built form Colin Ashby coach parts.








Graham brought along his 009 scale "Hawkins Tower" layout, seen with a Sharp Stewart tram loco and modified Egger Bahn coach about to pass the tea stall.









Stuart displayed an effective laser cut/engraved brick wall, which had been partly tinted with good brick colours, and a natural wood Heywood style wagon for Gn15 scale.










James was displaying a Krauss kit-built 0-6-0 loco in O-16.5 (Oe) on a Roco chassis, the body is a KS Modelleisenbahnen - Krauss C - Kuppler Waldbahn Dampflok, a laser cut styrene kit.











An 009 scale Chivers 579 kit of FR Harlech Castle on a Farish chassis being test run by Richard for a future Scottish layout.


April 2016 Meeting

We held our April meeting in Barsham as usual and there was a good attendance.  Quite a few new locos and rolling stock were displayed along with the beginnings of a pizza style layout and a chassis for a 71/4" gauge wagon.  We discussed our recent Open Day Exhibition, the strong possiblity of another show next year, and meeting venues.  Four suggestions were put forward for next years "challenge" and we hope to decide on which one to take-up by mid summer.


Re-painted in the smart Beccles & Bungay Railway livery are these Peco Glyn Valley four-wheeled coached and brake van, displayed by Richard.





Stuart was displaying the 71/4" gauge crate wagon chassis constructed only that very day.  The wheels had been recently cast in Sheffield.
Chris has been busy building three new tram locos for his layouts.  This is a much modified Chevalier kit .  Recent additions are the spring hangers and coal bars added to the rear bunker. 
A modified Kerr Stuart Skylark.
.... and a Gem Vari-Kit, all running on the Kato 4 wheel tram chassis.
This is Chris's neat railcar combo built with a Colin Ashby wagon, Parkside Dundas coach sides and running on a Kato "Shorty" bo-bo chassis.
Geoff was displaying his O-16.5 scale radio controlled 2-6-2 North British style loco which ran very smoothly.
Jim's newly completed kit is this York Model Making "Flower of the Forest" Ravenglass & Eskdale vertical boilered tram loco running on a Kato 4 wheeled chassis.
A pizza style layout baseboard displayed by Phillip built onto an occasional table leg frame. 

January 2016 Meeting

We last met on Saturday January 16th at the St Johns Ambulance Hall in Beccles where over a dozen members attended.  This meeting was mainly to plan for our Open Day on March 5th but several models were displayed.  Two or three new visitor members met up with us and one of them brought along a G scale live steam Lynton & Barnstaple loco, at the other end of the scale an Nn3 Southwold Railway railcar was displayed by Stewart.  James has acquired two new baseboards and is intending to construct a O-16.5 layout on them, while Graham has done a lot of work to his river side layout.

Grahams new river side layout christened "Ellerbank" was static displayed.  Final "details" can be applied soon to finish the layout. 


One of Stewarts rail cars under construction.  Part of a Worsley Works brass Southwold coach etch and diecast bonnet has been used running on a Kato 11-103 tram chassis.










Stewarts very much smaller scale "Nn3" railcar is this 2mm scale brass etch on a Marklin rail cleaner chassis. Great micro modelling.




A super Accucraft Lynton & Barnstaple G scale live steam model of "Lew" shown by John.
Bill brought along this 1/16th model based on a Drewry Rail Tractor which has been used on his small "Knights Yard" layout.  The body has been built with cardboard, and the driver is animated.
Richard recently acquired these virtually mint Eggerbahn items in original boxes.
Jim brought along his hew kit, a 009 scale Rusby's Models resin railbus, some of the components are shown here.
Graham also displayed this scratch built station building inspired by the Glynn Valley Tramway structures.

December 2015 Meeting

Several of us gathered for our December meeting at Barsham Village Hall, and there were several new models displayed. 

Geoff brought along a 0-16.5 brass chassis complete with valve gear and motor that is being constructed for radio controlled North British (British style) 2-6-2 locomotive design body, - superb miniature engineering.  Alex was displaying his small industrial 009 shelf layout and a new kit-built Grainge & Hodder baseboard section 900mm x 400mm.  On the test track were several On30 and 009 locomotives some of which are pictured below.  Alan showed a collection of On30 locos that he had recently purchased or had been working on, Phil was showing a 009 scale De Winton 3D loco and Richard brought along a Narrow Planet Hunslet, a 3D printed railcar and a new Minitrains release Baldwin 2-6-2.  Graham brought along the beginnings of a new river side shelf layout and a series of scratch built buildings in 009 scale.  Jim was showing us the additions made to his table top layout "Hubbards Halt" including point controls made using fibreglass rod.


Narrow Planet Penrhyn "Pamela" Quarry Hunslet kit displayed by Richard, now the Beccles & Bungay Railway No.11.








Beccles & Bungay Railway No.25, a 3D printed railbus by Shapeways running on a Kato 4w tram chassis.  Displayed by Richard.






A 009 De Winton loco by Tebee running on a Kato chassis purchased from the internet, made and displayed by Phil.








A On30 Bachmann 28799 (Spectrum) 2-6-6-2 DCC fitted Articulated Loco converted to an 0-6-6-0 by Alan.







A range of scratch built buildings specifically built for 009 scale displayed by Graham.

More details, see:







An A1 Models (43d) Freelance Diesel kit displayed by Alex.








An old Chivers Bagnall still running on an Ibertren Cuckoo 0-4-0 chassis on Graham's new river side layout (as yet un-named).  The baseboard is made from an old board built by the late Ray Fothergill and is extended out at the front for the river scene.